Archive for the 'Museum News' Category

April 21st, 2011 ~ by admin

Inside the 1802: a Visual6502.org View


RCA 1802E Die - 20x magnification - Visual6502.org

The talent at Visual6502.org continues.  After imaging and building a complete simulator for the MOS 6502 they did the same for the Motorola 6800 (from which the 6502 was based).

We have sent Visual6502.org several chips and they have now imaged the RCA 1802 that we sent.  What is very interesting is how little marking are on the die, the only that I could see was the number ‘10824.’  This particular chip was dated early 1981 though the 1802 COSMAC was designed in 1976 and was one of the first CMOS microprocessors.  The 1802 had around 5000 transistors (Visual6502 will let us know exactly how many once they are done, and of course what each and every one of them does). For higher res shots and more info see here

April 1st, 2011 ~ by admin

Osborne Computer: The Rise and Fall

Technologizer has published a very interesting article on Osborne Computers, and its founder, Adam Osborne.  Osborne computers was started 30 years ago (April 3rd 1981).  They were the fastest growing, and fastest failing company in Silicon Valley, impressive even today. Adam Osborne was one of the most important people in Silicon Valley (along with Bill Gates and Steve Jobs).  His books in the 70’s are still invaluable resources for collectors, I have several editions of ‘An Introduction to Microcomputers’ which provide an invaluable reference to some of the chip designs of the 1970’s and early 1980’s.

The Osborne 1, the first wildly successful portable, was based on a Zilog Z80A processor and ran the then popular CP/M OS.  If it wasn’t for cash flow problems, Osborne computers may very well have still been making computers today.  It is also interesting that Mr. Osborne had a habit of picking designs that ended up to be not very successful (he chose the Zilog Z8000 and Intel 8089 I/O processor as ‘Chips of the Year’ in 1980)

November 23rd, 2010 ~ by admin

Another Apple 1, Another Quarter Million Dollars

In September a Apple 1 computer with a few accessories sold for $23,000.  Christie’s has just auctioned off an early (first run) Apple 1, with invoice, shipping box, letter from ‘Steven Jobs’ and many accessories for a staggering $213,600.  This would have been one of the original PCB’s, sold without components and later assembled by someone else.  The main CPU is of course a 6502 but in this case a R6502P by Rockwell made in late 1981.

Complete Apple 1

What made this one so much more valuable?  The documentation and original box.  Whoever bought it should however replace the CPU with a white ceramic MOS 6502 to preserve the beauty of the original Apple 1.

October 18th, 2010 ~ by admin

Before the PC, Before Apple, was the Xerox Alto

Xerox Alto-II XM

Just last month an Apple 1 computer sold on eBay for almost $23,000. Today, the father of the PC, and where Steve Jobs got many of his inspirations (as did Bill Gates and numerous other founders of the computer industry), sold on eBay for a bit over $30,000.

The Xerox Alto was really the first modern computer as we know it.  It was developed at the PARC research center, and had Ethernet, a mouse, a GUI, and assorted other things we are rather use to now.  The date? 1973. Xerox did not understand the significance of what they had.  They made over 2000 Altos of various configurations, but never sold them, most were simply given away to friends, workers, and universities.

Though never sold, the Alto’s value in the 1970s was $32,000  or so, not a far cry (disregarding inflation) of what a non-working one just sold for on eBay

The Alto was powered by a custom16-bit bit-slice processor consisting of 4 TTL 74181 ALU’s one of the first uses of the 74181, which was itself the first single chip ALU.

TI SN74S181N - Late 1973 - 90MHz

The 74181 consisted of around 75 gates, and could perform 16 arithmetic functions and 16 logic functions on a pair of 4-bit inputs.  It was, for its time, very fast, much faster then most of the single chip processors of the time.  A 74S181 like shown here, using Schottky technology, could operate at up to 90MHz or so.  Obviously in a computer like the Alto actual clock speed would be reduced to match what the memory could do, which in the Alto, with its 128K of RAM, worked out to 5.8MHz.

Posted in:
Museum News

October 11th, 2010 ~ by admin

Soviet Beauties: Processors from behind the Iron Curtain

The Soviet Union’s electronic programs were mainly focused on copying and cloning Western devices.  Either by simple theft, or painstaking reverse engineering.  They made clones of devices such as the Intel 8080, and the AMD 2901 as well as simple TTL.  The Soviets also made many single and multi-chip versions of the venerable DEC PDP-11 computer system.  Many of these have no Western analogs, they were pure creations of the Soviet industry.

Soviet Kvantor 580VM80 - Intel 8080 - Milspec

While Western chips rapidly transitioned into mostly black plastic by the 1980s the Soviets did not.  The 8080 above was made in 1991 though looks like something from the 70’s. Black plastic is cheap, and easy to make, but it isn’t great looking. The Soviets on the other hand made some of the best looking (if not always functioning) processors of the time.

Soviet J-11 Missing the chips

Here is just the substrate (its a non finished example) of a Soviet clone of the DEC J-11 CPU. Not often do you see a brilliant blue processor.

Soviet Angstrem K1801VM1

This is a nice pink ceramic Soviet PDP-11 5MHz CPU. Again this was made in 1991.  Its a form of surface mount package that was used extensively for industrial and military designs.  Just as the PDP-11 was used by the American military throughout the 70’s and 80’s. the Soviets used it (and now Russians) in todays times.

Soviet era CPUs are very interesting to collect.  Each state run factory had their own logo which was typically (but not always) put on the chip. Many part numbers were made by more then one factory. Most chips have a western analog, but not all.  Soviet chips also were ever so slightly different sized then Western ones. The Soviets used a pin spacing of 2.5mm where as the West used 0.1″ (2.54″), rather noticeable on a 40 pin DIP. Reading/translating some of the Cyrillic  based characters can be a chore but really when you get to see things like this…

Electronika J-11 - Image courtesy of iguana_kiev

Can you really complain?

September 15th, 2010 ~ by admin

Homebrew Cray-1A – 1976 vs 2010

In 1976 the fasted normal processor ran at around 5MHz (such as the RCA 1802).  Personal computers really hadn’t been thought of, and mainframes were massive.  It was then that Seymour Cray decided to build a Super Computer. A computer that would be better and faster then most anything that existed at the time.

The Cray-1 ran at a blistering 80MHz, and could work with a staggering 32MB of memory.  This performance was not achieved in personal computers until the 1990’s.  No single processor of 1976 could attain these speeds so Cray designed his own.  Only 4 different types of ICs were used in the Cray-1 (2 types of quad-NAND gates and 2 types of SRAM)  All of the logic was ECL (Emitter Coupled Logic) which was very fast, very power hungry, and produced a lot of heat.  In all the Cray-1 used some 200,000 gates, many of which were solely used to add timing delays to make sure signaling did not generate standing waves or switching noise.

Original Cray-1 Circuit Board

Recently a man by the name of Chris Fenton decided to make a 1/10th WORKING scale model of the Cray-1A. This is no small feat, there is not a lot of surviving documentation for the Cray, nor is there much of any software left (they were mostly retired from service by 1990).  Chris wished the Cray-1 to physically look like the Original (including the padded bench seat) as well as be binary code compatible.  His implementation runs at 33MHz on a Xilinx Spartan-3E 1600 CPLD.  Basically this is a dev board with a chip that has a complex array of programmable logic that you can program to do what you want.  In this case 1.6 million gates, about 1.2 Million of which are used in the design, significantly more the the original.

Cray-1A Model

The original Cray weighed in at 5.5 tons with the cooling system, and drew around 30kW of power. The 1/10th scale? will run on a few batteries.  Supercomputers are still an important part of computing, but as vector processing expands (what the Cray was orginally diesgned for)  such things as graphics cards can be used to perform much of the tasks of a supercomputer, and do so faster and cheaper.

Regardless, when people think of a Super Computer, they think of the Cray

September 13th, 2010 ~ by admin

The Increasing Threat of Fake IC’s

We have previously talked about the issue of fake IC’s.  The problem continues to get worse, and is making more and more press.  Almost 10,000 incidents of fake ICs were recorded by the commerce department in the US in 2008 (the most recent stats available). Each ‘incident’ is usually several thousand IC’s.  Over 2 million fake IC’s are seized per years, on average one shipment per hour of fake IC’s is caught and seized.  How many slip through is anyones guess, and likely much higher.

Some counterfeits are easy to spot

As infrastructure ages, and is kept in service well beyond its designed life, and well beyond the life of the IC’s that run it the issue of fakes gets more and more dangerous.  Normal manufacturers simply do not make these devices anymore, so brokers fill the gap. Many of which are less then reputable.

Two options exist to help alleviate this.  First there is a small few manufacturers who make new legacy components, based on the original masks of the original devices. Rochester Electronics (REI)  is perhaps the best known and largest, manufacturing over 20,000 part numbers to OEM spec. Innovasic also makes ASIC based OEM compatible devices.

The second is building a network of authorized distributors.  These are distributors that stock IC’s that are no longer made and are trustworthy.  The Authorized Directory is a site that allows searching of such distributors as well as news about the counterfeiting problem and what is being done about it.

As collectors counterfeit ICs are hard to deal with.  Museums don’t tend to purchase in quantities enough to warrant purchase from large distributors.  Collectors do however work together to help find counterfeit IC’s and determine easier ways to spot them.

More Info at Mercury News

Posted in:
Museum News

June 8th, 2010 ~ by admin

Unlocking EPROM cores?

Its well known that manufacturers such as Intel and AMD will sell quad cores as dual cores, or 6-cores as quad-cores in order to meet demand, or to use dies that didn’t ‘make the cut.’ This process has been going on for over 30 years though. Back in the 70’s and 80’s it was very common for a device such as this:

Intel D2704 4k EPROM

Which is a 2704 4k EPROM, to actually be made from a 2708 die, just with not all the leads connected, or sometimes, with them connected but just labeled as the smaller part. In a production environment, it is cheaper to have a single production line making dies that can be used in more then one device, then having an entire seperate production line just to make a product that may not be the most popular.  Look at this die shot (its a bit blurry) but you can see its a 2708 die.

2704 with 2708 die

Once again, whats new, really isn’t we have just went from small EPROMs, to CPUs with billions of transistors

May 14th, 2010 ~ by admin

A look at the CPU Shack….Boxes Boxes and more

I was out of town for a couple weeks visiting family. My friends were of course ‘taking care’ of The CPU Shack while I was gone. Upon my return I entered the Shack and this is what I found:

Yah thats over 100 boxes of CPUs that came in the 14 days I was gone, all stacked in the entrance to the rest of my house. Welcome to The Shack!

March 31st, 2010 ~ by admin

The Origin of ARM – New Finds for the Museum

I’ve posted a fair amount about ARM processors, as today, they are in about everything. That was not always the case. ARM began with a small British company called Acorn Computers, who made various computers such as the BBC Micro (6502 based). They began developing a RISC processor in 1983 with their silicon partner VLSI. We recently received a few early versions of the ARM so here they are, with a brief history.

VLSI VL2333-QC 8MHz ARM1 CPU circa 1988

By 1985 they had the first working silicon of the ARM1 processor, a full 32bit design. It had around 25,000 transistors (compared with the earlier Motorola 68000 which had 70,000) so was relatively cheaper.

VLSI VL86C010-16PSQC 16MHz ARM2 CPU

VLSI VL86C010-16PSQC 16MHz ARM2 CPU circa 1990 - Prototype

The next year the released the ARM2 processor, which added a hardware multiply instruction and ran at 8MHz. It had around 30,000 transistors.

VLSI VY86C610C 30MHz ARM610 CPU circa 1994

VLSI VY86C610C 30MHz ARM610 CPU circa 1994

In 1994 the ARM6 was released with higher clocks (up to 60MHz) and more features.  The rest as we say is history, with many many varieties of cores available, at speeds over 1GHz, but STILL very small footprints. The ARM cores are licenses to hundreds of companies worldwide, and used in millions of devices, and it all began almost 30 years ago.